Corrosion Test Chambers are designed to evaluate the resistance of materials and coatings under accelerated corrosive environments in accordance with international standards. They provide reliable, repeatable, and uniform exposure conditions for accurate corrosion-performance assessment.
Corrosion Test Chambers are designed to evaluate the resistance of materials and coatings under accelerated corrosive environments in accordance with international standards. They provide reliable, repeatable, and uniform exposure conditions for accurate corrosion-performance assessment.
The specifications below reflect the current Therm-X product information. Custom chamber sizes and application-specific configurations are available on request where stated.
| Model Number | Volume | Internal Test Space (W × D × H) |
|---|---|---|
| XSST180 | 180 Liters | 600 × 500 × 600 mm |
| XSST/XCCT330 | 330 Liters | 1100 × 500 × 600 mm |
| XSST/XCCT590 | 590 Liters | 1100 × 900 × 600 mm |
| XSST/CCT1240 | 1240 Liters | 1600 × 1300 × 600 mm |
| Parameter | Specification |
|---|---|
| Salt Spray Temperature Range | 5°C above ambient to 50°C |
| Saturator Temperature Range | 5°C above ambient to 65°C |
| Dry Cycle Temperature Range | 5°C above ambient to 70°C |
| Humidity Range | 30% RH to 95% RH at 40°C to 60°C |
| Temperature Stability | ±2°C |
| Humidity Stability | ±3% RH |
| Salt Spray Fall-Out Rate | Adjustable from 0.5 to 3 ml/hr, measured over an 80 cm² area |
| Feature | Description |
|---|---|
| FRP Construction | Non-corrosive fibre-reinforced plastic construction for long service life and durability |
| Saturator Tower | Provides saturated air for uniform spray as required by the standard |
| Embedded Heaters | Enable indirect and uniform heating inside the chamber |
| Angle Racks | Allow test samples to be placed in an inclined position |
| Hanging Rods | Facilitate suspension of samples during testing |
| FRP Crate | Provided for safe placement of heavy test samples |
| Spray Nozzles / Atomizers | Non-corrosive material for consistent and uniform mist generation |
| Timer & Temperature Controller | Individual timer and temperature controller for precise test control |
Share your test standard, specimen dimensions, operating range, load, and site utilities. Our engineering team will recommend the appropriate configuration.
Discuss Your Requirement →